Fsat Cure Heat Conductive Silicone Sealant Factory Wholesale is thermal adhesive with heatsink and sealing strength.Thermally Conductive Glue is mainly used for electronic industry to bond two items or fill gap and conduct the heat. REACH, ROHS certified MSDS for air/sea shipment Non-corrosive to most metal material Excellent thermal conductivity Good resistance in change of hot and cold temp Good Performance for insulation
Features & Benefits of Fsat Cure Heat Conductive Silicone Sealant Factory Wholesale
TENSAN Thermally Conductive Glue is thermally adhesive with heatsink and sealing strength.Thermally Conductive Glue is mainly used for electronic industry to bond two items or fill gap and conduct the heat.
◆ REACH, ROHS certified
◆ MSDS for air/sea shipment
◆ Non-corrosive to most metal material
◆ Excellent thermal conductivity
◆ Good resistance in change of hot and cold temp
◆ Good Performance for insulation
Typical Applications of Fsat Cure Heat Conductive Silicone Sealant Factory Wholesale
This material is widely applied in electronics products like consumer electronics, power supply , lamp devices etc.
◆ Used to replace thermal grease for CPU and its heat sink conductor
◆ To use in SCR intellectualized control module and its radiator
◆ Use to fill the gap between electronic module and radiator and make heat conduct
Packing Information of Fsat Cure Heat Conductive Silicone Sealant Factory Wholesale
1. Hard plastic tube 100 ml
100 tubes / carton
2. Hard plastic tube 300 ml
24 tubes / carton
3. Hard plastic tube 2600ml
4 tubes / carton
4. Customized packing is acceptable
Storage and Validity of Fsat Cure Heat Conductive Silicone Sealant Factory Wholesale
Keep away from children .
Stored in a cool, ventilated, dry place.
Shelf life: 6 months
Typical Properties of Fsat Cure Heat Conductive Silicone Sealant Factory Wholesale
Item |
Index |
Appearance |
White semi-flow |
Tack free time( min ) |
5~15 |
Complete cure time 25℃(H) |
24 |
Viscosity(KCPS) |
60 |
Specific Gravity( g/cm3) |
2.0±0.02 |
Thermal Conductivity (w/m.k) |
1.0 |
Thermal Resistance @50psi |
0.08 |
Break Down Voltage (K Vac/mm) |
>6 |
Dielectric Constant @1Mhz |
6.0 |
Hardness( Shore ) ≥ |
65 |
Tensile Strength ( Mpa ) ≥ |
2.0 |
Breaking Elongation ( % ) ≥ |
180 |
Volume Resistivity ( Ω.cm3 ) ≥ |
5.0×1014
|
Temperature range( ℃ ) |
-50~200 |
Flame resistance |
V-0 |
Other Information
The above information are correct, but does not contain all of the information and can only be used as a guide.
This product is ROHS, REACH compliant. It does not contain any unknow carcinogenic, mutagenic or teratogenic components.
Further information please visit our web:www.sztensan.com