Two-component dispensing system

AUTO   DISPENSING   MACHINE   INTRODUCTION

Two-component dispensing system

Tensan  has launched new multipurpose off-the-shelf dispensing solutions combining high-precision 3-axis robots with integrated digital dispense controllers 。 

FIRST、 equipment features:

01, the use of reciprocating piston pump or precision gear metering pump metering, long life, wear resistance; metering pump warranty for three years without changing the pump!

02, XYZ large trip, RBI, drawing lines, plane, half arc, irregular circle. Irregular curve!

03, with high precision glue, high precision spit, repeat high precision!

04, double foolproof operation software!

05, twelve months zero fault!

SECOND   the device function description:

01, double stepper motor to promote the AB metering pump metering, modify the adjustment of the motor parameters adjustment ratio, 100: 100 to 100: 10 digital adjustment   ratio, no need to change the metering pump.

02, filling the discharge speed, time can be set digital, continuous infusion total.

03, double bucket design, AB material separate storage, to ensure that raw materials for a long time does not cure.

04, AB the top of the mixing cylinder to prevent liquid precipitation, AB separate heating function, set aside vacuum function.

05, storage bucket configuration up and down liquid level sensor, lack of material automatic alarm, liquid below the level when the automatic alarm automatic lock machine, automatically unlock after feeding.

06, metering discharge pressure detection function, effectively prevent the liquid precipitate in the pipeline caused by the proportion of blockage disorders.

07, AB using dynamic (static) mixing valve, mixed evenly, full, no wire, no water.

08, AB valve anti-curing function, automatic anti-curing equipment, effectively prevent the liquid in the mixing tube curing.

09, AB valve automatic cleaning function, just jog cleaning switch button, the device automatically cleaned to complete, no need to disassemble the mixed tube cleaning;

10, touch screen + microcontroller control, Chinese and English interface, anti-fake operation program design, simple operation, practical, ordinary staff 30 minutes to learn all the operating methods.

11, with automatic assembly line, production line, three-axis robot hand work.

12, XYZ three-axis manipulator effective stroke: 600mm * 600mm * 100mm;

13, XY axis for the stepper motor + synchronization technology;

14, XYZ axis repeat accuracy ± 0.02mm;

15, XYZ mechanical trajectory is simple to write, hand writers write program, can read and write CAD graphics data;

16, XYZ manipulator with RBI, drawing lines, plane, half arc, irregular circle. Irregular curve continuous linkage and other functions, can adapt to any irregular objects filling;

THIRD、Third, the filling speed:

1, filling head running speed: AB with glue for glue speed: 0.5 g / s to 50 g / s.

2, the measurement accuracy: ± 1%, ratio accuracy: ± 1%, perfusion accuracy: ± 1%

3, XYZ mechanical speed of 600mm / S; Z axis for the step + screw technology